Close
Owls CMS
Owls CMS
Contact us
products
Self-operated Pressure Controller PCV Type 41-23

products

Products of eyvaz company
Self-operated Pressure Controller PCV Type 41-23 Self-operated Pressure Controller PCV Type 41-23 Self-operated Pressure Controller PCV Type 41-23

Product information

  • Product Title : Self-operated Pressure Controller PCV Type 41-23
  • Production code : PCV Type 41-23
  • Professional Name : Self-operated Pressure Controller PCV Type 41-23

General information Self-operated Pressure Controller PCV Type 41-23 Self-operated Pressure Controller PCV Type 41-23

Self – Operated pressure control valve is a useful device to fix pressure on an adjusted set point. Its adjustable pressure range is 0.2…28 bar and 3~400Psi. Its size varies from DN15 to DN100 or 1/2" to 4". Its nominal pressure is PN16 to PN40 and working class is 150/300. Its maximum temperature is 350°c or 662° F. This device is made based on DIN or ANSI standards. 41-23 valve is usable for liquid, non-flammable gases and steam lines.

Function Self-operated Pressure Controller PCV Type 41-23 Self-operated Pressure Controller PCV Type 41-23

Type 41-23 steam pressure reducing valve controls the output pressure and keep it on the special set point automatically. This valve is normally open and when output pressure increase, it gets gradually closed. This valve is proper for all fluids apart from inflammable gases. The correct direction of steam in the valve is indicated by one arrow on its body. Output pressure is conducted to actuator via control line (via condensation chamber and connection tube, if fluid is steam) then intered

Installation Self-operated Pressure Controller PCV Type 41-23 Self-operated Pressure Controller PCV Type 41-23

This valve is only suitable for installation in horizontal pipelines. The flow direction in the valve must be corresponded with the arrow on its body and the actuator of device must be installed upside-down. Before pipeline designation, pay attention to the input and output size and distance of valve from consumer. To protect the valve from pipeline condensation, the pipeline must be installed with a moderate slope to the flow direction or you can use a steam trap. After installation, you have to be sure that valve is not pressed in pipeline. According to the decreasing pressure in the output of valve, it is recommended to choose bigger diameter for output side of valve.

Download product Catalogue and installation tutorial Self-operated Pressure Controller PCV Type 41-23 Self-operated Pressure Controller PCV Type 41-23

Product Catalogue Self-operated Pressure Controller PCV Type 41-23 Self-operated Pressure Controller PCV Type 41-23 Manual installation - PDF Self-operated Pressure Controller PCV Type 41-23 Self-operated Pressure Controller PCV Type 41-23

:

I to P Positioner Type 3730-1 Samson

I to P Positioner Type 3730-1 Samson

I TO P positioner is used for controlling the valve with Type NCV 24-11 by input flow. .

Analog Thermostatic Sensor TS Type 22-31

Analog Thermostatic Sensor TS Type 22-31

Analog Thermostatic Sensor TS Type 22-31 works based on physical rule of liquid expansion. Temperature sensor of this device is placed inside the tank….

Manual Thermostatic Sensor TS Type 22-41

Manual Thermostatic Sensor TS Type 22-41

the safe operation of unit is guaranteed if only it is installed, started up and maintained by qualified and skilled person, and most importantly, based….

Magnetic Sensor for Magnetic Level Gauge Type MS15

Magnetic Sensor for Magnetic Level Gauge Type MS15

Magnetic Sensor type MS15 install next to the Level Gauge. When the floater goes up exist magnetic field and finally change to the micro switch..

Thermodynamic Steam Trap With Bimetallic Air Vent Type TDS 30-62

Thermodynamic Steam Trap With Bimetallic Air Vent Type TDS 30-62

The thermodynamic trap is an extremely robust steam trap with a simple mode of operation. The trap operates by means of the dynamic effect of flash steam….

Stainlesssteel Vacuum Breaker Type SVB 40-10

Stainlesssteel Vacuum Breaker Type SVB 40-10

In air and compressed gasses system, humidity of air and gases is usually converted to condensate and flocked in the system. This condensate causes to….

Brass Vacuum Breaker type BVB 40-16

Brass Vacuum Breaker type BVB 40-16

In liquid line, vacuum sometimes is occured. This event causes to appropriate movement of liquid and decrease efficiency of system or during draining….

Control Pressure Switch Type CPS 20-62

Control Pressure Switch Type CPS 20-62

The foundation of Control Pressure Switch Type CPS 20-62 is electromechanical.This kind of pressure switch is usually mounted vertically on the top of….

Control Pressure Switch Type CPS 20-61

Control Pressure Switch Type CPS 20-61

The foundation of pressure switch is electromechanical.    .

Mechanical Level Switch Type MLS 20-02

Mechanical Level Switch Type MLS 20-02

Function of this device is based on electro-mechanical. With change of liquid level, the floater ball with connected lever move up and down (vertically).the….