Close
Owls CMS
Owls CMS
Contact us
products
Self-operated Excess Pressure Controller PCV Type 41-73

products

Products of eyvaz company
Self-operated Excess Pressure Controller PCV Type 41-73 Self-operated Excess Pressure Controller PCV Type 41-73 Self-operated Excess Pressure Controller PCV Type 41-73

Product information

  • Product Title : Self-operated Excess Pressure Controller PCV Type 41-73
  • Production code : PCV Type 41-73
  • Professional Name : Self-operated Excess Pressure Controller PCV Type 41-73

General information Self-operated Excess Pressure Controller PCV Type 41-73 Self-operated Excess Pressure Controller PCV Type 41-73

Self –operated pressure control valve is used to counteract excess pressure of a system on the adjusted set point. Its adjustable pressure range is 0.2…28 bar and 3…400Psi and its size varies from DN15 to DN100 or 1/2" to 4". Its nominal pressure is PN16 or PN40, Working Classes is 150 to 300 and Maximum Temperature is 350°c OR 662° F. This device is made based on DIN and ANSI standards. 41-23 valve is usable for liquid, non-flammable gases and steam lines.

Function Self-operated Excess Pressure Controller PCV Type 41-73 Self-operated Excess Pressure Controller PCV Type 41-73

Type 41-73 steam pressure reducing valve controls the output pressure and keep it in the special set point automatically. This valve is normally closed and as the output pressure increases, it gets gradually open. This valve is suitable for all fluids except inflammable gases. The correct direction of steam in the valve is indicated by one arrow on its body. Input pressure is transmitted to the actuator by control line (via condensate chamber and connection tube, if fluid is steam), and entered to the diaphragm then input pressure is conducted to actuator by shaft to plug in effect of this, plug

Installation Self-operated Excess Pressure Controller PCV Type 41-73 Self-operated Excess Pressure Controller PCV Type 41-73

This valve is proper to horizontal installation on pipelines. Its actuator has to be upside down. After installation get assure that it is not compressed with pipeline. Because of its weight, this valve may need a supporting guide close to connection place. This will prevent shakes to damage the valve. Never use any kind of shackles to stop shaking of valve or actuator.

Download product Catalogue and installation tutorial Self-operated Excess Pressure Controller PCV Type 41-73 Self-operated Excess Pressure Controller PCV Type 41-73

Product Catalogue Self-operated Excess Pressure Controller PCV Type 41-73 Self-operated Excess Pressure Controller PCV Type 41-73 Manual installation - PDF Self-operated Excess Pressure Controller PCV Type 41-73 Self-operated Excess Pressure Controller PCV Type 41-73

:

I to P Positioner Type 3730-1 Samson

I to P Positioner Type 3730-1 Samson

I TO P positioner is used for controlling the valve with Type NCV 24-11 by input flow. .

Analog Thermostatic Sensor TS Type 22-31

Analog Thermostatic Sensor TS Type 22-31

Analog Thermostatic Sensor TS Type 22-31 works based on physical rule of liquid expansion. Temperature sensor of this device is placed inside the tank….

Manual Thermostatic Sensor TS Type 22-41

Manual Thermostatic Sensor TS Type 22-41

the safe operation of unit is guaranteed if only it is installed, started up and maintained by qualified and skilled person, and most importantly, based….

Magnetic Sensor for Magnetic Level Gauge Type MS15

Magnetic Sensor for Magnetic Level Gauge Type MS15

Magnetic Sensor type MS15 install next to the Level Gauge. When the floater goes up exist magnetic field and finally change to the micro switch..

Thermodynamic Steam Trap With Bimetallic Air Vent Type TDS 30-62

Thermodynamic Steam Trap With Bimetallic Air Vent Type TDS 30-62

The thermodynamic trap is an extremely robust steam trap with a simple mode of operation. The trap operates by means of the dynamic effect of flash steam….

Stainlesssteel Vacuum Breaker Type SVB 40-10

Stainlesssteel Vacuum Breaker Type SVB 40-10

In air and compressed gasses system, humidity of air and gases is usually converted to condensate and flocked in the system. This condensate causes to….

Brass Vacuum Breaker type BVB 40-16

Brass Vacuum Breaker type BVB 40-16

In liquid line, vacuum sometimes is occured. This event causes to appropriate movement of liquid and decrease efficiency of system or during draining….

Control Pressure Switch Type CPS 20-62

Control Pressure Switch Type CPS 20-62

The foundation of Control Pressure Switch Type CPS 20-62 is electromechanical.This kind of pressure switch is usually mounted vertically on the top of….

Control Pressure Switch Type CPS 20-61

Control Pressure Switch Type CPS 20-61

The foundation of pressure switch is electromechanical.    .

Mechanical Level Switch Type MLS 20-02

Mechanical Level Switch Type MLS 20-02

Function of this device is based on electro-mechanical. With change of liquid level, the floater ball with connected lever move up and down (vertically).the….